| # | Code | Name | UG | GR | ADC | Subject | Subject Code | Academic Department | Status | |
|---|---|---|---|---|---|---|---|---|---|---|
| 3701 | TECH139 | Electrical Fundamentals A practical overview primarily focused on the essential components, fundamental concepts, and design/code considerations of residential electrical wiring from a trade and management perspective. Credits: 2, Lab Fee 15 ($400), Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (2026 — Indefinite) Future (2026-01-01) Proposal — Workflow Step: UG Curriculum Committee, Undergraduate Curriculum Committee | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Review | |
| 3702 | TECH139 | Electrical Fundamentals A practical overview primarily focused on the essential components, fundamental concepts, and design/code considerations of residential electrical wiring from a trade and management perspective. Credits: 2, Lab Fee 14 ($350), Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (2024 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Engineering and Physics | Active | |
| 3703 | TECH140 | Structures and Analysis I An introductory course in the calculated analysis of forces acting on a structure in equilibrium and the reactive structural behavior to those forces. Topics covered may include, but not be limited to: resultants, moment, load paths, equilibrium, free body diagrams, friction, center of gravity, moment of inertia, stress and strain. Credits: 2, Lab Fee 04 ($30), Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (2010 - 2024) Discontinued (2023-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Business | Active | |
| 3704 | TECH140 | Structures and Analysis I An introductory course in the calculated analysis of forces acting on a structure in equilibrium and the reactive structural behavior to those forces. Topics covered may include, but not be limited to: resultants, moment, load paths, equilibrium, free body diagrams, friction, center of gravity, moment of inertia, stress and strain. Credits: 2, Lab Fee 06 ($90), Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (2025 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Active | |
| 3705 | TECH140 | Structures and Analysis I An introductory course in the calculated analysis of forces acting on a structure in equilibrium and the reactive structural behavior to those forces. Topics covered may include, but not be limited to: resultants, moment, load paths, equilibrium, free body diagrams, friction, center of gravity, moment of inertia, stress and strain. Credits: 2, Lab Fee 06 ($90), Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (2024 - 2025) Discontinued (2024-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Active | |
| 3706 | TECH147 | Methods and Materials of Construction This course is designed to provide the students with an understanding of the most commonly used materials in the construction industry, their inherent and manipulated properties, and industry applications. The history and development of materials will also be considered. Individual and group projects related to the studied materials will rpvide hands-on manipulation and personal creativity. Field trips will be scheduled to supplement student exposure and learning. Credits: 2, Lab Fee 10 ($210), Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (2026 — Indefinite) Future (2026-01-01) Proposal — Workflow Step: UG Curriculum Committee, Undergraduate Curriculum Committee | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Review | |
| 3707 | TECH147 | Methods and Materials of Construction This course is designed to provide the students with an understanding of the most commonly used materials in the construction industry, their inherent and manipulated properties, and industry applications. The history and development of materials will also be considered. Individual and group projects related to the studied materials will rpvide hands-on manipulation and personal creativity. Field trips will be scheduled to supplement student exposure and learning. Credits: 2, Lab Fee 08 ($150), Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (2010 - 2024) Discontinued (2023-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Business | Active | |
| 3708 | TECH147 | Methods and Materials of Construction This course is designed to provide the students with an understanding of the most commonly used materials in the construction industry, their inherent and manipulated properties, and industry applications. The history and development of materials will also be considered. Individual and group projects related to the studied materials will rpvide hands-on manipulation and personal creativity. Field trips will be scheduled to supplement student exposure and learning. Credits: 2, Lab Fee 10 ($210), Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (2024 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Engineering and Physics | Active | |
| 3709 | TECH149 | Introduction to Mechanical Drawing and CADD An introductory level course in Computer-Aided Drafting Design (CADD) using AutoCAD software in orthographic projection, surface development, sectioning, pictorial representation, dimensioning, and working drawings. Drawings plotted to scale on A, B, C, and D size paper. Six periods of laboratory each week. Lecture as announced by the instructor. This course is cross-listed with ENGR 149. A student may receive credit for this course from only one program. Credits: 3, Lab Fee 03 ($20), Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (2026 — Indefinite) Future (2026-01-01) Proposal — Workflow Step: UG Curriculum Committee, Undergraduate Curriculum Committee | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Review | |
| 3710 | TECH149 | Introduction to Mechanical Drawing and CADD An introductory level course in Computer-Aided Drafting Design (CADD) using AutoCAD software in orthographic projection, surface development, sectioning, pictorial representation, dimensioning, and working drawings. Drawings plotted to scale on A, B, C, and D size paper. Six periods of laboratory each week. Lecture as announced by the instructor. This course is cross-listed with ENGR 149. A student may receive credit for this course from only one program. Credits: 3, Lab Fee 03 ($20), Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (1987 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Engineering and Physics | Active | |
| 3711 | TECH151 | Introduction to Architectural Drafting and CADD (SERV-2) An introduction to skills and basic knowledge of architectural drafting. Emphasis is on lettering, orthographic projection, parallel line pictorial drawings, shades and shadows, and perspective drawing. Open to all students. Credits: 3, Lab Fee 05 ($60), Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (1989 - 2023) Discontinued (2022-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Active | |
| 3712 | TECH152 | Structures and Analysis II A continued study in the calculated analysis of forces acting on a structure in equilibrium and the reactive structural behavior to those forces. Topics covered may include, but not be limited to: stress and strain, torsion, shear forces, bending moments, deflection. Design calculations will be considered for beams, columns, and connections with consideration given based on the properties of different materials. Credits: 2, Lab Fee 04 ($30), Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (2010 - 2024) Discontinued (2023-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Business | Active | |
| 3713 | TECH152 | Structures and Analysis II A continued study in the calculated analysis of forces acting on a structure in equilibrium and the reactive structural behavior to those forces. Topics covered may include, but not be limited to: stress and strain, torsion, shear forces, bending moments, deflection. Design calculations will be considered for beams, columns, and connections with consideration given based on the properties of different materials. Credits: 2, Lab Fee 06 ($90), Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (2024 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Engineering and Physics | Active | |
| 3714 | TECH154 | Woodworking (SERV-2) A study of hand and machine tools, jointery, and proper methods of furniture construction. The required introductory project will be donated to a charitable organization such as the Samaritan Center. One period lecture, six periods laboratory each week. A supplies fee will be charged for the cost of the materials used in project construction. Credits: 3, Lab Fee 04 ($30), Level: Undergraduate, Offered: FALL | WINTER Catalog: ✔️ Undergraduate (1987 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Engineering and Physics | Active | |
| 3715 | TECH157 | Construction Finishes A practical overview primarily focused on the principles and practice of finish installations of a construction project from a trade and management perspective. Topics will include but not be limited to insulation, sheetrock, interior trim, floor coverings, paint, cabinets, and installation of electrical, plumbing, and HVAC fixtures. Local codes will be considered as required. Credits: 2, Lab Fee 12 ($300), Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (2025 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Active | |
| 3716 | TECH157 | Construction Finishes A practical overview primarily focused on the principles and practice of finish installations of a construction project from a trade and management perspective. Topics will include but not be limited to insulation, sheetrock, interior trim, floor coverings, paint, cabinets, and installation of electrical, plumbing, and HVAC fixtures. Local codes will be considered as required. Credits: 2, Lab Fee 12 ($300), Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (2023 - 2025) Discontinued (2024-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Active | |
| 3717 | TECH157 | Electrical, Mechanical and Finishes II A practical overview primarily focused on the principles and practice of finish installations of a construction project from a trade and management perspective. Topics will include but not be limited to insulation, sheetrock, interior trim, floor coverings, paint, cabinets, and installation of electrical, plumbing, and HVAC fixtures. Local codes will be considered as required. Hands-on experience provided through real building project. Credits: 2, Lab Fee 10 ($210), Level: Undergraduate, Offered: VARIABLE Catalog: ✔️ Undergraduate (2009 - 2023) Discontinued (2022-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Active | |
| 3718 | TECH164 | Automotive Maintenance A course designed to help the car owner become knowledgeable in the matters of buying, servicing, and maintaining the auto. The student will work on his own car or on one belonging to the shop. One period lecture and three periods laboratory each week. Credits: 2, Lab Fee 04 ($30), Level: Undergraduate, Offered: FALL | WINTER Catalog: ✔️ Undergraduate (1987 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Engineering and Physics | Active | |
| 3719 | TECH166 | Auto Electrical Systems A course designed to give a basic understanding of automotive electrical systems. Basic electrical principles and troubleshooting techniques will be taught. Emphasis will be given to lighting, charging, starting and accessory systems. One period lecture, three periods lab per week. Credits: 2, Lab Fee 12 ($300), Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (2026 — Indefinite) Future (2026-01-01) Proposal — Workflow Step: UG Curriculum Committee, Undergraduate Curriculum Committee | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Review | |
| 3720 | TECH166 | Auto Electrical Systems A course designed to give a basic understanding of automotive electrical systems. Basic electrical principles and troubleshooting techniques will be taught. Emphasis will be given to lighting, charging, starting and accessory systems. One period lecture, three periods lab per week. Credits: 2, Lab Fee 10 ($210), Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (1993 - 2023) Discontinued (2022-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Active | |
| 3721 | TECH166 | Auto Electrical Systems A course designed to give a basic understanding of automotive electrical systems. Basic electrical principles and troubleshooting techniques will be taught. Emphasis will be given to lighting, charging, starting and accessory systems. One period lecture, three periods lab per week. Credits: 2, Lab Fee 11 ($240), Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (2023 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Engineering and Physics | Active | |
| 3722 | TECH167 | Suspension, Steering and Alignment A course designed to give understanding of automotive suspension and steering systems. Chassis service, repair, and troubleshooting will be taught. Alignment of both two and four wheel alignment systems will be taught. One and a half period lecture and four and a half hours of labs per week. Credits: 3, Lab Fee 08 ($150), Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (2026 — Indefinite) Future (2026-01-01) Proposal — Workflow Step: UG Curriculum Committee, Undergraduate Curriculum Committee | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Review | |
| 3723 | TECH167 | Suspension, Steering and Alignment A course designed to give understanding of automotive suspension and steering systems. Chassis service, repair, and troubleshooting will be taught. Alignment of both two and four wheel alignment systems will be taught. One and a half period lecture and four and a half hours of labs per week. Credits: 3, Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (1993 - 2024) Discontinued (2023-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Business | Active | |
| 3724 | TECH167 | Suspension, Steering and Alignment A course designed to give understanding of automotive suspension and steering systems. Chassis service, repair, and troubleshooting will be taught. Alignment of both two and four wheel alignment systems will be taught. One and a half period lecture and four and a half hours of labs per week. Credits: 3, Lab Fee 04 ($30), Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (2024 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Engineering and Physics | Active | |
| 3725 | TECH168 | Manual Drive Train, and Axles A study of manual drive train operation, diagnosis and repair, clutches, manual transmissions and transaxles. Repair of differentials and transfer cones will be taught as well as four wheel drive theory, operation, and service. Credits: 3, Lab Fee 08 ($150), Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (2026 — Indefinite) Future (2026-01-01) Proposal — Workflow Step: UG Curriculum Committee, Undergraduate Curriculum Committee | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Review | |
| 3726 | TECH168 | Manual Drive Train, and Axles A study of manual drive train operation, diagnosis and repair, clutches, manual transmissions and transaxles. Repair of differentials and transfer cones will be taught as well as four wheel drive theory, operation, and service. Credits: 3, Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (1993 - 2024) Discontinued (2023-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Business | Active | |
| 3727 | TECH168 | Manual Drive Train, and Axles A study of manual drive train operation, diagnosis and repair, clutches, manual transmissions and transaxles. Repair of differentials and transfer cones will be taught as well as four wheel drive theory, operation, and service. Credits: 3, Lab Fee 04 ($30), Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (2024 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Engineering and Physics | Active | |
| 3728 | TECH169 | Automotive Brakes A study of brake system operations, troubleshooting, and repair. Conventional and antilock brake systems will be taught. Credits: 3, Lab Fee 08 ($150), Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (2026 — Indefinite) Future (2026-01-01) Proposal — Workflow Step: UG Curriculum Committee, Undergraduate Curriculum Committee | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Review | |
| 3729 | TECH169 | Automotive Brakes A study of brake system operations, troubleshooting, and repair. Conventional and antilock brake systems will be taught. Credits: 3, Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (2006 - 2024) Discontinued (2023-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Business | Active | |
| 3730 | TECH169 | Automotive Brakes A study of brake system operations, troubleshooting, and repair. Conventional and antilock brake systems will be taught. Credits: 3, Lab Fee 04 ($30), Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (2024 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Engineering and Physics | Active | |
| 3731 | TECH170 | Carpentry-Residential A practical overview primarily focused on the essential components, fundamental concepts, and design/code considerations of residential carpentry from a trade and management perspective. We will be covering all aspects of house framing and of building decks. Credits: 3, Lab Fee 12 ($300), Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (2026 — Indefinite) Future (2026-01-01) Proposal — Workflow Step: UG Curriculum Committee, Undergraduate Curriculum Committee | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Review | |
| 3732 | TECH170 | Carpentry-Residential A practical overview primarily focused on the essential components, fundamental concepts, and design/code considerations of residential carpentry from a trade and management perspective. We will be covering all aspects of house framing and of building decks. Credits: 3, Lab Fee 12 ($300), Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (2020 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Engineering and Physics | Active | |
| 3733 | TECH175 | Engine Rebuilding and Machining A course designed to acquaint the student with major engine diagnosis, decision making and overhaul procedures. Machining and measuring processes related to engine rebuilding will be taught. Each student will be required to rebuild an engine and do engine machine work. Two periods lecture, six periods of lab per week. Credits: 4, Lab Fee 22 ($1100), Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (1993 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Engineering and Physics | Active | |
| 3734 | TECH178 | Automotive Heating and Air Conditioning A course designed to teach the principles of heating and air conditioning systems. Emphasis will be given to service and trouble shooting of manual and automatic heating systems of late model cars. One period lecture, three periods lab per week. Credits: 2, Lab Fee 09 ($180), Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (2026 — Indefinite) Future (2026-01-01) Proposal — Workflow Step: UG Curriculum Committee, Undergraduate Curriculum Committee | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Review | |
| 3735 | TECH178 | Automotive Heating and Air Conditioning A course designed to teach the principles of heating and air conditioning systems. Emphasis will be given to service and trouble shooting of manual and automatic heating systems of late model cars. One period lecture, three periods lab per week. Credits: 2, Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (2023 - 2024) Discontinued (2023-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Business | Active | |
| 3736 | TECH178 | Automotive Heating and Air Conditioning A course designed to teach the principles of heating and air conditioning systems. Emphasis will be given to service and trouble shooting of manual and automatic heating systems of late model cars. One period lecture, three periods lab per week. Credits: 2, Lab Fee 05 ($60), Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (2024 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Engineering and Physics | Active | |
| 3737 | TECH178 | Heating and Air Conditioning A course designed to teach the principles of heating and air conditioning systems. Emphasis will be given to service and trouble shooting of manual and automatic heating systems of late model cars. One period lecture, three periods lab per week. Credits: 2, Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (1993 - 2023) Discontinued (2022-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Active | |
| 3738 | TECH179 | Principles of Concrete and Masonry Construction A practical overview primarily focused on the essential components, fundamental concepts, and design/code considerations of residential concrete and masonry from a trade and management perspective. Credits: 3, Lab Fee 12 ($300), Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (2015 - 2023) Discontinued (2022-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Active | |
| 3739 | TECH180 | Real-Estate Development This course is designed to provide skills in identifying the attributes of real estate that lead to successful development. It will emphasis site selection, through physical inspections looking at topography, hydrology and orientation to the sun, research of prior ownership and use, research on zoning ordinances. This course will also develop skills in acquisition financing, development and sale of the completed property. Credits: 2, Lab Fee 05 ($60), Level: Undergraduate, Offered: FALL EVEN YEARS Catalog: ✔️ Undergraduate (2020 - 2023) Discontinued (2022-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Active | |
| 3740 | TECH180 | Real-Estate Development This course is designed to provide skills in identifying the attributes of real estate that lead to successful development. It will emphasis site selection, through physical inspections looking at topography, hydrology and orientation to the sun, research of prior ownership and use, research on zoning ordinances. This course will also develop skills in acquisition financing, development and sale of the completed property. Credits: 2, Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (2023 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Engineering and Physics | Active | |
| 3741 | TECH182 | Concrete and Masonry Fundamentals A practical overview primarily focused on the essential components, fundamental concepts, and design/code considerations of residential concrete and masonry from a trade and management perspective. Credits: 2, Lab Fee 12 ($300), Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (2023 - 2024) Discontinued (2023-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Business | Active | |
| 3742 | TECH182 | Concrete and Masonry Fundamentals A practical overview primarily focused on the essential components, fundamental concepts, and design/code considerations of residential concrete and masonry from a trade and management perspective. Credits: 2, Lab Fee 16 ($500), Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (2024 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Engineering and Physics | Active | |
| 3743 | TECH183 | Basic Electronics An introductory course to the properties of electricity/electronics as they pertain to AC and DC electrical circuits and devices such as diodes, transistors and integrated circuits. Intended to introduce the beginning student to the field of electronics. Two three-hour lecture/labs each week. Credits: 3, Level: Undergraduate, Offered: VARIABLE Catalog: ✔️ Undergraduate (1988 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Engineering and Physics | Active | |
| 3744 | TECH230 | Automatic Transmission A course designed to give understanding of automatic transmissions, transaxle overhaul and troubleshooting. Transmission removal, installation, rebuilding, and service will be taught. One hour lecture and five hours lab time per week. Credits: 3, Lab Fee 16 ($500), Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (2026 — Indefinite) Future (2026-01-01) Proposal — Workflow Step: UG Curriculum Committee, Undergraduate Curriculum Committee | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Review | |
| 3745 | TECH230 | Automatic Transmission A course designed to give understanding of automatic transmissions, transaxle overhaul and troubleshooting. Transmission removal, installation, rebuilding, and service will be taught. One hour lecture and five hours lab time per week. Credits: 3, Lab Fee 22 ($1100), Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (1998 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Engineering and Physics | Active | |
| 3746 | TECH248 | CADD Mechanical This course covers the application of CAD skills using AutoCAD software to the areas of architecture, structural design, pipe, welding, fasteners, pattern development, cams and gears and map drafting. Six periods of laboratory each week. Lecture as announced by the instructor. Credits: 3, Lab Fee 02 ($15), Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (2026 — Indefinite) Future (2026-01-01) Proposal — Workflow Step: UG Curriculum Committee, Undergraduate Curriculum Committee | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Review | |
| 3747 | TECH248 | CADD Mechanical This course covers the application of CAD skills using AutoCAD software to the areas of architecture, structural design, pipe, welding, fasteners, pattern development, cams and gears and map drafting. Six periods of laboratory each week. Lecture as announced by the instructor. Credits: 3, Lab Fee 02 ($15), Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (2007 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Engineering and Physics | Active | |
| 3748 | TECH253 | Residential Construction Codes The International Residential Code is covered in the order a residential building, from site-work and foundations to fire-safety and environmental requirement of a finished residence including requirements for plumbing, mechanical, fuel gas, and electrical systems. Credits: 3, Lab Fee 06 ($90), Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (2025 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Active | |
| 3749 | TECH253 | Residential Construction Codes The International Residential Code is covered in the order a residential building, from site-work and foundations to fire-safety and environmental requirement of a finished residence including requirements for plumbing, mechanical, fuel gas, and electrical systems. Credits: 3, Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (2015 - 2023) Discontinued (2022-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Active | |
| 3750 | TECH253 | Residential Construction Codes The International Residential Code is covered in the order a residential building, from site-work and foundations to fire-safety and environmental requirement of a finished residence including requirements for plumbing, mechanical, fuel gas, and electrical systems. Credits: 3, Lab Fee 06 ($90), Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (2023 - 2025) Discontinued (2024-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Active | |
| 3751 | TECH254 | Furniture Design and Construction Emphasis will be placed on the design and techniques necessary to construct a quality piece of furniture. Two-three hour lecture/lab each week. A supplies fee will be charged for the cost of the materials used in project construction. Credits: 3, Lab Fee 04 ($30), Level: Undergraduate, Offered: FALL | WINTER Catalog: ✔️ Undergraduate (2026 — Indefinite) Future (2026-01-01) Proposal — Workflow Step: UG Curriculum Committee, Undergraduate Curriculum Committee | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Review | |
| 3752 | TECH254 | Furniture Design and Construction Emphasis will be placed on the design and techniques necessary to construct a quality piece of furniture. Two-three hour lecture/lab each week. A supplies fee will be charged for the cost of the materials used in project construction. Credits: 3, Lab Fee 04 ($30), Level: Undergraduate, Offered: FALL | WINTER Catalog: ✔️ Undergraduate (1988 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Engineering and Physics | Active | |
| 3753 | TECH255 | Construction Estimating-Residential Commercial and residential cost planning techniques will be taught including overhead, labor, materials, and hidden costs. How to schedule to efficiently utilize the work for subcontractors will be taught, along with bid preparation and cost analysis of materials and profit margins. Credits: 3, Lab Fee 06 ($90), Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (2024 - 2025) Discontinued (2024-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Active | |
| 3754 | TECH255 | Construction Estimating-Residential Commercial and residential cost planning techniques will be taught including overhead, labor, materials, and hidden costs. How to schedule to efficiently utilize the work for subcontractors will be taught, along with bid preparation and cost analysis of materials and profit margins. Credits: 3, Lab Fee 06 ($90), Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (2025 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Active | |
| 3755 | TECH255 | Construction Estimating-Residential Commercial and residential cost planning techniques will be taught including overhead, labor, materials, and hidden costs. How to schedule to efficiently utilize the work for subcontractors will be taught, along with bid preparation and cost analysis of materials and profit margins. Credits: 3, Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (2022 - 2023) Discontinued (2022-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Active | |
| 3756 | TECH255 | Construction Estimating-Residential Commercial and residential cost planning techniques will be taught including overhead, labor, materials, and hidden costs. How to schedule to efficiently utilize the work for subcontractors will be taught, along with bid preparation and cost analysis of materials and profit margins. Credits: 3, Lab Fee 05 ($60), Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (2023 - 2024) Discontinued (2023-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Business | Active | |
| 3757 | TECH261 | Construction Contract Administration Surveys, administrative procedures of general and subcontractors. Studies documentation, claims, arbitration, litigation, bonding, insurance, and indemnification. Discusses ethical practices. Lecture and field trips. Credits: 3, Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (2023 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Engineering and Physics | Active | |
| 3758 | TECH261 | Construction Contract Administration Surveys, administrative procedures of general and subcontractors. Studies documentation, claims, arbitration, litigation, bonding, insurance, and indemnification. Discusses ethical practices. Lecture and field trips. Credits: 3, Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (2026 — Indefinite) Future (2026-01-01) Proposal — Workflow Step: UG Curriculum Committee, Undergraduate Curriculum Committee | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Review | |
| 3759 | TECH262 | Construction Contract Administration Surveys, administrative procedures of general and subcontractors. Studies documentation, claims, arbitration, litigation, bonding, insurance, and indemnification. Discusses ethical practices. Lecture, and field trips. Credits: 2, Lab Fee 03 ($20), Level: Undergraduate, Offered: FALL EVEN YEARS Catalog: ✔️ Undergraduate (2022 - 2023) Discontinued (2022-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Active | |
| 3760 | TECH264 | Automotive Repair A course designed to give basic understanding of the automobile. Main emphasis is given to power plant and drive train design, operation and service. One period lecture and three periods laboratory each week. All lab learning experience is on actual cars either from the community or personal vehicles. Credits: 3, Lab Fee 05 ($60), Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (2026 — Indefinite) Future (2026-01-01) Proposal — Workflow Step: UG Curriculum Committee, Undergraduate Curriculum Committee | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Review | |
| 3761 | TECH264 | Automotive Repair A course designed to give basic understanding of the automobile. Main emphasis is given to power plant and drive train design, operation and service. One period lecture and three periods laboratory each week. All lab learning experience is on actual cars either from the community or personal vehicles. Credits: 3, Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (1988 - 2023) Discontinued (2022-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Active | |
| 3762 | TECH264 | Automotive Repair A course designed to give basic understanding of the automobile. Main emphasis is given to power plant and drive train design, operation and service. One period lecture and three periods laboratory each week. All lab learning experience is on actual cars either from the community or personal vehicles. Credits: 3, Lab Fee 04 ($30), Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (2023 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Engineering and Physics | Active | |
| 3763 | TECH265 | Topics in Technology Topics selected from areas of technology not covered in other courses. May be repeated with permission. Credits: 1 - 3, Level: Undergraduate, Offered: FALL | WINTER Catalog: ✔️ Undergraduate (1999 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Engineering and Physics | Active | |
| 3764 | TECH270 | Service in Construction (SERV-2) An integrated application for development and reinforcement of trade and/or management skills through service initiatives. Students, collaboratively with the construction management instructor will seek out, select, arrange, and participate in service activities that engage and challenge the utilization of elements from their construction management education and through which immediate benefits are brought to others. To be at least 50 documented hours per credit hour completed during the semester taken. Activity involvement outside the semester may count toward the 50 hours needed at the discretion of the instructor. Submission of the two-year portfolio required for successful completion. May be taken for 1 or 2 credits. Credits: 0 - 2, Level: Undergraduate, Offered: VARIABLE Catalog: ✔️ Undergraduate (2010 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Engineering and Physics | Active | |
| 3765 | TECH271 | 3-D Modeling Software This course teaches the use of various drafting software options and apps. This course is cross-listed with TECH 371. A student may receive credit for this course from only one program. Credits: 3, Lab Fee 06 ($90), Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (2023 - 2024) Discontinued (2023-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Business | Active | |
| 3766 | TECH271 | 3-D Modeling Software This course teaches the use of various drafting software options and apps. This course is cross-listed with TECH 371. A student may receive credit for this course from only one program. Credits: 3, Lab Fee 07 ($120), Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (2024 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Engineering and Physics | Active | |
| 3767 | TECH272 | 3-D Modeling Software This course teaches the use of various drafting software options and apps. This course is cross-listed with TECH 372. A student may receive credit for this course from only one program. Credits: 2, Lab Fee 06 ($90), Level: Undergraduate, Offered: VARIABLE Catalog: ✔️ Undergraduate (2020 - 2023) Discontinued (2022-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Active | |
| 3768 | TECH274 | Automotive Estimating Estimate writing, customer relations, and business practices in an automotive shop. Training in how to use an estimated labor time guide as well as parts purchasing will be included. Credits: 2, Lab Fee 06 ($90), Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (2024 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Engineering and Physics | Active | |
| 3769 | TECH274 | Automotive Estimating Estimate writing, customer relations, and business practices in an automotive shop. Training in how to use an estimated labor time guide as well as parts purchasing will be included. Credits: 2, Lab Fee 07 ($120), Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (2023 - 2024) Discontinued (2023-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Business | Active | |
| 3770 | TECH274 | Estimating and Automotive Business Practices A course in estimate writing, customer relations, and business practice in an automotive shop. Training in how to use an estimated labor time guide as well as parts purchasing will be included. Credits: 2, Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (2015 - 2023) Discontinued (2022-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Active | |
| 3771 | TECH276 | Engine Performance and Computers Electronic and computerized ignition systems operating theory will be emphasized. Each student will be taught drivability diagnosis and troubleshooting techniques for electronic and computerized systems. Hands on diagnosis practice using diagnostic equipment on live vehicles will be given Credits: 3, Lab Fee 04 ($30), Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (2024 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Engineering and Physics | Active | |
| 3772 | TECH276 | Engine Performance and Computers Electronic and computerized ignition systems operating theory will be emphasized. Each student will be taught drivability diagnosis and troubleshooting techniques for electronic and computerized systems. Hands on diagnosis practice using diagnostic equipment on live vehicles will be given Credits: 3, Lab Fee 08 ($150), Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (2026 — Indefinite) Future (2026-01-01) Proposal — Workflow Step: UG Curriculum Committee, Undergraduate Curriculum Committee | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Review | |
| 3773 | TECH276 | Engine Performance and Computers Electronic and computerized ignition systems operating theory will be emphasized. Each student will be taught drivability diagnosis and troubleshooting techniques for electronic and computerized systems. Hands on diagnosis practice using diagnostic equipment on live vehicles will be given Credits: 3, Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (1998 - 2024) Discontinued (2023-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Business | Active | |
| 3774 | TECH277 | Engine Fuel and Emission Controls Both carburetor and fuel injection operation theory, and standard and electronic carburetion systems theory will be covered. Fuel injection diagnosis and repair as well as carburetor overhaul procedures will be taught. Emission control operation as well as trouble shooting and service procedures will be taught. Credits: 4, Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (1998 - 2023) Discontinued (2022-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Active | |
| 3775 | TECH279 | Engine Fuel and Emission Controls Both carburetor and fuel injection operation theory, and standard and electronic carburetion systems theory will be covered. Includes fuel injection diagnosis and repair, carburetor overhaul procedures, emission control operation, troubleshooting, and service procedures. Credits: 3, Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (2023 - 2024) Discontinued (2023-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Business | Active | |
| 3776 | TECH279 | Engine Fuel and Emission Controls Both carburetor and fuel injection operation theory, and standard and electronic carburetion systems theory will be covered. Includes fuel injection diagnosis and repair, carburetor overhaul procedures, emission control operation, troubleshooting, and service procedures. Credits: 3, Lab Fee 04 ($30), Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (2024 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Engineering and Physics | Active | |
| 3777 | TECH280 | A.T. Construction Management Capstone This capstone course draws from all the coursework studied in the Construction Management program. It will require a plan, drawings, material list, estimate, and a schedule that covers the project from start to finish, including verifying zoning and documentation of needed permit requirements. Project includes writing components and an oral presentation to peers and professionals. Credits: 3, Lab Fee 07 ($120), Level: Undergraduate, Offered: FALL | SUMMER | WINTER Catalog: ✔️ Undergraduate (2023 - 2024) Discontinued (2023-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Business | Active | |
| 3778 | TECH280 | A.T. Construction Management Capstone This capstone course draws from all the coursework studied in the Construction Management program. It will require a plan, drawings, material list, estimate, and a schedule that covers the project from start to finish, including verifying zoning and documentation of needed permit requirements. Project includes writing components and an oral presentation to peers and professionals. Credits: 3, Lab Fee 05 ($60), Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (2025 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Active | |
| 3779 | TECH280 | A.T. Construction Management Capstone This capstone course draws from all the coursework studied in the Construction Management program. It will require a plan, drawings, material list, estimate, and a schedule that covers the project from start to finish, including verifying zoning and documentation of needed permit requirements. Project includes writing components and an oral presentation to peers and professionals. Credits: 3, Lab Fee 05 ($60), Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (2024 - 2025) Discontinued (2024-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Active | |
| 3780 | TECH291 | Practicum Supervised work experience in Auto Body or Auto Service. Procedures and guidelines are available from the department. The required hours are 50 hours per credit hour. Credits: 1 - 3, Level: Undergraduate, Offered: FALL | WINTER Catalog: ✔️ Undergraduate (1998 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Engineering and Physics | Active | |
| 3781 | TECH293 | Construction Internship A construction internship consists of on-the-job construction-related experience working under supervision on a full-time basis. Students choosing 0 hours will receive a grade of pass/fail. A minimum of 100 clock hours of work experience for each semester hour of credit. Approval required prior to beginning the work experience. Requires employer forms pre/post internship. Credits: 0 - 3, Level: Undergraduate, Offered: FALL | SUMMER | WINTER Catalog: ✔️ Undergraduate (2023 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Engineering and Physics | Active | |
| 3782 | TECH295 | Directed Study The study of a specific problem in the field of Technology. A written report of the problem may be required by the supervising instructor. Open only to those earning a minor in Technology. Offered on demand. Credits: 1 - 3, Level: Undergraduate, Offered: VARIABLE Catalog: ✔️ Undergraduate (1987 - 2023) Discontinued (2022-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Active | |
| 3783 | TECH295 | Independent Study The independent study of a specific problem in the field of Technology. A written report of the problem may be required by the supervising instructor. Open only to those earning a minor in Technology. Offered on demand. Credits: 1 - 3, Level: Undergraduate, Offered: VARIABLE Catalog: ✔️ Undergraduate (2023 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Engineering and Physics | Active | |
| 3784 | TECH299 | Advanced Engine Performance A course in advanced electronic and computerized engine control system theory and diagnostics. On board diagnostics II on 1995 and later vehicles will be taught. Lab experience will include scan tool and lab scope usage in diagnosing OBDII systems. Credits: 3, Lab Fee 04 ($30), Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (2024 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Engineering and Physics | Active | |
| 3785 | TECH299 | Advanced Engine Performance A course in advanced electronic and computerized engine control system theory and diagnostics. On board diagnostics II on 1995 and later vehicles will be taught. Lab experience will include scan tool and lab scope usage in diagnosing OBDII systems. Credits: 3, Lab Fee 08 ($150), Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (2026 — Indefinite) Future (2026-01-01) Proposal — Workflow Step: UG Curriculum Committee, Undergraduate Curriculum Committee | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Review | |
| 3786 | TECH299 | Advanced Engine Performance A course in advanced electronic and computerized engine control system theory and diagnostics. On board diagnostics II on 1995 and later vehicles will be taught. Lab experience will include scan tool and lab scope usage in diagnosing OBDII systems. Credits: 3, Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (1998 - 2024) Discontinued (2023-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Business | Active | |
| 3787 | TECH309 | Commercial Blueprint Reading The study of architectural blueprints for commercial structures. The meaning of blueprint symbols and scales. Concepts and requirements to construct, bid, and produce a material list for structures based on blueprint drawings. Emphasis on commercial blueprints. Credits: 2, Lab Fee 05 ($60), Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (2025 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Active | |
| 3788 | TECH328 | Advanced Architectural Drafting This course covers all aspects of the development of working drawings for complete sets of plans for residential and commercial construction. Students will use up-to-date CAD software and develop the skill to complete such plans efficiently. One hour of lecture and two hours of lab. Credits: 3, Lab Fee 02 ($15), Level: Undergraduate, Offered: VARIABLE Catalog: ✔️ Undergraduate (2006 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Engineering and Physics | Active | |
| 3789 | TECH328 | Advanced Architectural Drafting This course covers all aspects of the development of working drawings for complete sets of plans for residential and commercial construction. Students will use up-to-date CAD software and develop the skill to complete such plans efficiently. One hour of lecture and two hours of lab. Credits: 3, Lab Fee 02 ($15), Level: Undergraduate, Offered: VARIABLE Catalog: ✔️ Undergraduate (2026 — Indefinite) Future (2026-01-01) Proposal — Workflow Step: UG Curriculum Committee, Undergraduate Curriculum Committee | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Review | |
| 3790 | TECH332 | Electrical-Residential A practical overview primarily focused on the essential components, fundamental concepts, and design/code considerations of residential electrical wiring from a trade and management perspective. Credits: 3, Lab Fee 12 ($300), Level: Undergraduate, Offered: FALL EVEN YEARS Catalog: ✔️ Undergraduate (2020 - 2023) Discontinued (2022-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Active | |
| 3791 | TECH339 | Electrical Fundamentals A study of the practical overview primarily focused on the essential components, fundamental concepts, and design/code considerations of electrical wiring from a trade and management perspective. Credits: 2, Lab Fee 12 ($300), Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (2023 - 2024) Discontinued (2023-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Business | Active | |
| 3792 | TECH339 | Electrical Fundamentals A study of the practical overview primarily focused on the essential components, fundamental concepts, and design/code considerations of electrical wiring from a trade and management perspective. Credits: 2, Lab Fee 14 ($350), Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (2026 — Indefinite) Future (2026-01-01) Proposal — Workflow Step: UG Curriculum Committee, Undergraduate Curriculum Committee | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Review | |
| 3793 | TECH339 | Electrical Fundamentals A study of the practical overview primarily focused on the essential components, fundamental concepts, and design/code considerations of electrical wiring from a trade and management perspective. Credits: 2, Lab Fee 14 ($350), Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (2024 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Engineering and Physics | Active | |
| 3794 | TECH347 | Methods and Materials of Commercial Construction Commercial construction principles, materials, and assemblies. Introduction to materials used in the commercial construction industry, their inherent and manipulated properties, and industry applications. The history and development of materials will also be considered. Individual and group projects related to the studied materials will provide hands-on manipulation and personal creativity. Field trips will be scheduled to supplement student exposure and learning. Credits: 2, Lab Fee 10 ($210), Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (2026 — Indefinite) Future (2026-01-01) Proposal — Workflow Step: UG Curriculum Committee, Undergraduate Curriculum Committee | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Review | |
| 3795 | TECH348 | 3D CAD Drafting This course is designed to give the student hands-on experience with modern 3D drafting software to produce architectural elevations, perspective drawings, walk-through animations, and presentations for applications in architectural drafting. One hour lecture and two hours of lab. Credits: 3, Lab Fee 02 ($15), Level: Undergraduate, Offered: VARIABLE Catalog: ✔️ Undergraduate (2006 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Engineering and Physics | Active | |
| 3796 | TECH348 | 3D CAD Drafting This course is designed to give the student hands-on experience with modern 3D drafting software to produce architectural elevations, perspective drawings, walk-through animations, and presentations for applications in architectural drafting. One hour lecture and two hours of lab. Credits: 3, Lab Fee 02 ($15), Level: Undergraduate, Offered: VARIABLE Catalog: ✔️ Undergraduate (2026 — Indefinite) Future (2026-01-01) Proposal — Workflow Step: UG Curriculum Committee, Undergraduate Curriculum Committee | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Review | |
| 3797 | TECH350 | Automotive Service Management This course addresses unique aspects of the automotive service industry, such as parts sourcing, pay scale/structures, customer service, warranty problems, and utilizing automotive shop management software. Credits: 3, Lab Fee 07 ($120), Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (2023 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | School of Engineering and Physics | Active | |
| 3798 | TECH352 | Construction Estimating-Commercial Commercial cost planning techniques will be taught including overhead, labor, materials, and hidden costs. How to schedule to efficiently utilize the work for subcontractors will be taught, along with bid preparation and cost analysis of materials and profit margins Credits: 3, Lab Fee 05 ($60), Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (2024 - 2025) Discontinued (2024-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Active | |
| 3799 | TECH352 | Construction Estimating-Commercial Commercial cost planning techniques will be taught including overhead, labor, materials, and hidden costs. How to schedule to efficiently utilize the work for subcontractors will be taught, along with bid preparation and cost analysis of materials and profit margins Credits: 3, Lab Fee 05 ($60), Level: Undergraduate, Offered: FALL Catalog: ✔️ Undergraduate (2025 — Indefinite) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Active | |
| 3800 | TECH352 | Construction Estimating-Commercial Commercial cost planning techniques will be taught including overhead, labor, materials, and hidden costs. How to schedule to efficiently utilize the work for subcontractors will be taught, along with bid preparation and cost analysis of materials and profit margins Credits: 3, Lab Fee 12 ($300), Level: Undergraduate, Offered: WINTER Catalog: ✔️ Undergraduate (2015 - 2023) Discontinued (2022-01-01) | ✔️ | ❌ | ❌ | Technology (TECH) | TECH | Applied Technology | Active |